Reflective road studs are used for dividing roads, separating roads or lane arrangement within the scope of traffic and road safety. Usually, there are reflective material or reflector on road studs. The reflectors are small but important material acts as a light by reflecting the vehicle headlights. Reflectors are used in three ways: Reflective sheet, plastic reflector, glass bead. Usually, plastic reflectors and reflective sheets are preferred in temporary road maintenance works. Using LED road stud would be beneficial in permanent places or the places where it is expected to last longer.
Aluminum reflective road studs are one of raised pavement markers. Aluminium reflective road studs is used for dividing the road boundary,for safety,reducing the accidents,made from aluminium alloy attached with the reflective sheet made from the acrylic plastic sheet.This acrylic is a reflective prism glass style and available 1 or 2 sides on road stud. In addition,there will be thin layer of the coated glass in order to enhance the reflective index during night time.
The specifications of Aluminum reflective road studs:
|Color||Red, Yellow, Green, Blue, White|
|Filling||Epoxy+ Quartz Sand|
|Load capacity||5 T|
|Packing||50 pcs / ctn|
|Life span||>3 years|
|Certificates||ASTM & EN1463-1|
Whats the different color aluminium reflective road studs mean on the motorway?
Red studs- mark the left edge of the road.
White studs- mark the lanes or the middle of the road.
Amber studs- mark the central reservation of a dual carriageway or motorway.
Green studs- mark the edge of the main carriageway at lay-bys and slip roads